pulverizer

OPERATION MANUAL the main purposes: This machine is suitable for pharmaceutical, chemical, food, powder, etc., is crushing, vacuuming out the material as one of continuous grinding equipment. Second, it works: This machine consists of crushing the host, cyclone separator, dust bins and Fan, etc. several parts, materials through hopper into the crushing chamber, high-speed rotation of the hammer being smashed and get crushed, crushed by the rotating centrifugal force and a good material for Fans role into the cyclone chamber through customs after the fan discharge, dust emissions from entering pulse dust box, filtered through the filter bag recycling, grinding fineness by sieve adjustment, the aircraft according to GMP standard design, all in stainless steel materials. Host with water cooling. Production no dust. ModelRotarydiaMotorpiwerTurbinerotatespeedThinness (mesh)OutputWF-20200mm5.5-7.5kw5000r/min60-20010-100kg/hWF-30300mm7.5-11kw4500r/min60-20030-300kg/hWF-40400mm11-15kw3800r/min60-20050-500kg/hWF-50500mm15-18.5kw3000 r/min60-20060-800kg/hWF-60600mm22kw2200 r/min60-200100-1000kg/hAssembly and Cautions 1) The machine is to be fixed on a flat floor at a level line. 2) Before running the machine, please make sure that all the connecting parts are not loose, that no metals are in the grinding cabinet, and that all the moving parts in good order. If it is jammed or emits strange noises, all the disorder should be removed before running the machine. Also please make sure the running direction is the same as shown by the arrow. Feeding is only carried out when the running of the machine is stable. 3) The materials to be ground are to be smaller than 10mm; the moisture, less than 12%. If the materials are too big, they should be first coarsely crushed. 4) Make sure no metals are mixed in the materials to be ground. 5) While connecting the cables, and keep the right running direction of the machine. 6) Feed materially continuously and evenly, do not feed over the capacity. 7) Use long a cloth bag to receive the powder. 8) After grinding, please first disconnect the power supply. Not until the machine has completely stopped can the door be opened. Meanwhile, please clean up the grinding bin and the sieves.